Watercolored Three-Tier Gift Box

This watercolored gift box set uses just one Spectrum Aqua Marker. An easy to make project that is sure to impress!

How to watercolor the box lids

First, trim two sheets of 8 1/2” x 11” Spectrum Aqua Watercolour Cardstock as shown in picture.

Then apply anti-static powder to each panel, if desired. On the three lid panels, use VersaMark ink to stamp flowers. Heat emboss with white embossing powder. On the left-over scrap panels, stamp and heat emboss more flowers. These extra flowers will be used to embellish the boxes.

Next, to watercolor the box lids, color Kingfisher Aqua marker randomly around the flowers.

After that apply a wet watercolor brush to an uncolored area, and then work the brush into the ink color. The ink will begin to flow into the wet areas, and you can continue to brush the color around as desired. The goal is to create a watercolor background around all the flowers.

How to watercolor the flowers

First, color the flower centers, and then blend out with watercolor brush.

Next color the flower embellishments with the Kingfisher Aqua marker in the areas you want darkest.

Then apply a wet watercolor brush to uncolored area, working the brush up to the ink. The ink will flow into the wet area and create beautiful watercolor flower petals.

Finally, set aside the panels to completely dry. Once dry, trim out all the flowers from the scrap panels and add a pearl to the centers. These will be used to decorate the boxes.

How to make the lids using The Ultimate Crafter’s Companion and The Boxer Board.

First place the lid panel onto The Boxer Board with one edge butted up against the “Box Lid” sidebar. Score at the 1″ line. Repeat this on all edges of all three panels.

Next cut a small v-shaped notch in each of the corners, where the scored lines intersect. The first cut should be along one of the scored lined, and the diagonal line should be cut from the excess corner piece. Fold and crease along each of the scored lines and adhere the corner tabs to form the lids.

How to make the box bottoms using The Ultimate Crafter’s Companion and The Boxer Board.

Start by creating the bottoms using three panels of white cardstock (measurements below). This time butt them up against the “Box Bottom” sidebar to score the lines. Cut corner notches, crease, and adhere the same way as the box lids.

Box bottom cutting and scoring measurements:

  • Large box bottom – 11 1/2” x 11 1/2” panel, score at 2 1/2” Box Bottom score line.
  • Medium box bottom – 9 1/2” x9 1/2” panel, score at 2 1/2” Box Bottom score line.
  • Small box bottom – 7 1/2” X 7 1/2” panel, score at 2 1/4” Box Bottom score line. (Note: The side tabs may need trimmed off a bit on this box bottom before adhering.)

 

Finally, assemble the boxes by stacking on top of each other, adhering together if desired.

Tie ribbon around the stack and embellish with cut out flowers.

 

Tutorial Credit: Lori Barnett

Supplies used for this project:

  • Spectrum Aqua Watercolour Cardstock
  • Spectrum Aqua Marker – Kingfisher
  • Crafter’s Companion Sheena Douglass Groovin’ 60’s Collection – Bloomin’ Sixties EZMount Rubber Stamps
  • The Ultimate Crafter’s Companion and The Boxer Score Board
  • Watercolor Brush
  • Anti-Static Pouch
  • VersaMark Ink Pad
  • White Embossing Powder
  • Heat Embossing Gun
  • 12” x 12” White Cardstock
  • White Pearl Stickers
  • White Ribbon
  • Dimensional Foam Adhesive
  • Adhesive

ColourBlend Pencil Resist

SAMSUNG CAMERA PICTURES

I wanted to share an easy, and versatile technique using Spectrum Noir ColourBlend pencils. I have used a stencil in the below video, but this can be used if you want to freehand a pattern or image.

It also works with a number of different mediums, including Spectrum Aqua Markers or Spectrum Noir AquaTints.

I hope you enjoyed the video! Share your work with us on our Facebook page, Twitter, Instagram, or Pinterest (use our #spectrumnoir or #spectrumaqua tag) – we’d love to see what you’re coloring!

 

Supplies-
Spectrum Noir Colorblend Pencils
Spectrum Aqua Marker- Black
Simon Says Stamp Large Dot Stencil
Friend Die- Simon Says Stamp
Hello Die & stamped sentiments- Hero Arts Stamp & Cut Hello
Postage stamp die- Memory Box
Heart Die- Tim Holtz

Tutorial credit: Tracy Freeman

Layered Backgrounds using Spectrum Aqua Markers

AquaBkgdFinalJClarkNOWM

Spectrum Aqua markers are the perfect medium for creating stunning layered background papers for your papercrafting projects.

AquaBkgdJClark_Stp1

Begin by scribbling various colors of Spectrum Aqua markers on a large acrylic block.

AquaBkgdJClark_Stp2

Spritz water over the acrylic block. Take a piece of high gloss cardstock, lay shiny side down on top of the acrylic block, carefully lift paper, dragging slightly to pickup of some of the color across the page.

Lay paper flat, color side up, until dry.

AquaBkgdJClark_Stp3

There will still be color left on the block, and it will yield much prettier results than it looks like it would!

Spritz the block again, repeat the process with a new piece of high gloss cardstock, this time dragging a little bit more across the block to pick up more color.

AquaBkgdJClark_Stp4

You will probably be able to repeat the process one more time, achieving three different backgrounds ready for some stamping.

My first laydown of paper is on the left, the second one in the middle, and the last one on the right.

You will notice how they get progressively lighter, as there is less color left on the block each time.

AquaBkgdJClark_Stp4a

Begin with the first colored background. This will be the most vibrant colored background.

AquaBkgdJClark_Stp10

Ink up a pattern stamp using Spectrum Aqua marker Crimson. Spritz water over the entire stamp, then stamp onto the background paper.

AquaBkgdJClark_Stp11

Choose a second pattern stamp (chose a floral stamp for this one) and stamp over background using Staz-On Jet Black ink.

Trim down, and this first background is finished and ready for a project.

AquaBkgdJClark_Stp5

Choose a background pattern stamp for the second background paper. I have chosen a script one that gives pretty full coverage across the paper. Color the stamp with Spectrum Aqua Sepia.

AquaBkgdJClark_Stp6

Stamp the pattern (script) stamp over the second background paper. Do not clean the stamp yet.

Next, a tree background stamp was stamped on top using Staz-On Jet Black ink. This second background paper is finished and ready for a project.

AquaBkgdJClark_Stp7

Before cleaning the pattern stamp (script) from the previous step, spritz the stamp with water and stamp over the third background paper.

Since this paper is already lighter in tone, the lighter coverage of remaining Spectrum Aqua Sepia on the pattern stamp pairs with it quite well.

AquaBkgdJClark_Stp8

Ink up a pattern stamp to top off this third background using Staz-On Jet Black ink. Here, I have inked up some areas darker than others to give a vintage effect.

AquaBkgdJClark_Stp9

Stamp over the third background paper, trim down, and this one is complete and ready for a project.

AquaBkgdJClark_Stp12

It is so quick and easy to create custom backgrounds using your Spectrum Aqua markers. I hope you have enjoyed this tutorial and would love for you to share with us your custom backgrounds you create using it!

Share your work with us on our Facebook page, Twitter, Instagram, or Pinterest (use our #spectrumnoir or #spectrumaqua tag) – we’d love to see what you’re coloring!

Project Details:

Spectrum Aqua markers: Navy, Bud Green, Gold, Crimson, Sepia
Spectrum Noir High Gloss cardstock
Crafter’s Companion UltraClear 5″x7″ Acrylic Block
Small water spritzer bottle
Staz-On Black ink
Stamps used:
Honeycomb and Script Bkgd stamps from Justrite Papercraft
Tree Branches and Vine with Flowers Bkgd stamps from Seaside Stampin’ Ink

Tutorial Credit: Jodi Clark

Aqua Emboss Resist with a Twist

Aqua Emboss Resist with a Twist Lori Barnett No Watermark

‘Emboss Resist’ is a very popular technique with card makers. There are many different ways of using this technique to get fantastic designs. This tutorial takes the basic emboss resist technique one step further.

With just two Spectrum Aqua watercolor markers, along with a few other supplies, you will be amazed at the added depth that is achieved without adding layers of bulk. Once you try this fun and easy “Aqua Emboss Resist with a Twist” technique, you are sure to do it again and again.

Aqua Emboss Resist with a Twist Pic 1 Lori Barnett No Watermark

Trim a Piece of watercolor cardstock to 3″ x 5 1/2″ (or desired size).

Secure the panel to a hard board with low-tack tape, overlapping the tape on the edges of the cardstock about 1/8″.

This leaves a nice white border around the panel. Taping watercolor cardstock to a hard board also helps to reduce warping while the panel dries.

Use an anti-static pouch to treat the watercolor cardstock before stamping. This is an important step when doing the emboss resist technique, as it helps prevent stray embossing powder from sticking where you don’t want it.

Stamp sentiment image, using VersaMark ink. Sprinkle with clear embossing powder. Tap off excess powder, and then heat set with heat embossing tool.

Aqua Emboss Resist with a Twist Pic 2 Lori Barnett No Watermark

Scribble Aquamarine Aqua marker ink on an acrylic block.

Dip a wide watercolor brush into clean water and pick up some ink from the block.

Paint the ink on the watercolor panel, adding more ink and water as needed. Set aside to dry.

NOTE: It’s best not to dry the panel with a heat embossing tool. The embossed image will re-melt when heated, and any ink that might be on top will permanently set into the embossed image.

However, if you don’t want to wait for the panel to air dry, use a baby wipe or paper towel to carefully wipe off any ink on the embossed image, and then dry with with a heat embossing tool.

Be careful not to overheat the embossed image, as it may scorch or melt down into the cardstock.

Aqua Emboss with a Twist Pic 3 Lori Barnett No Watermark

Once the panel is dry, treat it again with the anti-static pouch.

Stamp flower images, using VersaMark ink. Sprinkle with clear embossing powder.

Tap off excess powder, and then heat set with heat embossing tool.

Aqua Emboss with a Twist Pic 4 Lori Barnett No Watermark

Scribble Navy Aqua marker ink on an acrylic block.

Brush a wash of clean water over the panel with wide watercolor brush.

This pre-wets the cardstock so when the navy ink is painted on, it flows easily.

Aqua Emboss with a Twist Pic 5 Lori Barnett No Watermark

Pick up some of the navy ink from the block, and then begin painting and dabbing it onto the panel, picking up more ink as needed.

If there is excess ink in an area, or it puddles next to the tape, simply dab the area with the corner of a clean paper towel to lift the excess ink off the paper.

Set aside to dry.

Aqua Emboss with a Twist Pic 6 Lori Barnett No Watermark

After panel is completely dry, use a baby wipe (or slightly damp paper towel) to gently wipe away any ink that remains on the embossed images.

Carefully remove the tape from the from the panel.

Aqua Emboss with a Twist Pic 7 Lori Barnett No Watermark

The flower images will have the Aquamarine color under them, and the sentiment will be white.

This beautiful “Aqua Emboss Resist with a Twist” panel is now ready to be used on a greeting card.

Aqua Emboss Resist with a Twist Lori Barnett No Watermark

Aqua Emboss Resist with a Twist Closeup Lori Barnett Watermarked

I hope you will give this technique a try! Share a card or other project you make using this tutorial with us on our Facebook page, tag us on Instagram (#spectrumnoir or #spectrumaqua) or on Twitter (@SpectrumNoir)! We’re also on Pinterest so tag us there as well for a chance to get re-pinned to our Colorist Creations board! Please feel free to leave your comments below, we very much appreciate reading them.
Supplies used to make project:

  • Spectrum Aqua Markers – Aquamarine and Navy
  • Crafter’s Companion Watercolor Cardstock
  • My Favorite Things – Chalkboard Greetings Stamp Set
  • A Muse Studio – Mini Blooms Stamp Set
  • VersaMark Ink Pad
  • Clear Embossing Powder
  • Wide Watercolor Paintbrush
  • Anti-Static Pouch
  • Heat Embossing Tool
  • Hard Board
  • Low-tack tape
  • Clear Stamping Block
  • Baby Wipe or Paper Towel
  • Misc Cardstocks
  • Washi Tape
  • Blue Rhinestone Stickers
  • White button
  • Misc Ribbons & Twine
  • Dimensional Foam Tape
  • Adhesive

Tutorial credit: Lori Barnett

Video: Easy Christmas Landscapes with Spectrum Aqua

Christmas Landscapes made easy

In this tutorial the Spectrum Aqua markers are used to make light weight of those ‘must do’ Christmas makes.

The image created is the front page to a Christmas Gift Card Wallet to hold all those store gift cards for the hard to buy for members of the family. Watch the video below to see how it’s made:

There will be a follow up tutorial at a later date to show the dimensions of and how to make the Gift Card Wallet itself using your Spectrum Aqua artwork.

Materials used:
Spectrum Noir, Spectrum Aqua markers in Navy & Aquamarine (from the Primary set)
Crafter’s Companion 300gsm Watercolor card
Crafter’s Companion Stick and Spray
Crafter’s Companion Stick Away
Pebeo Drawing gum and old paintbrush or toothbrush (old, not to be used as a toothbrush again!)
Wide flat end paint brush
Hill mask made from acetate, doeflex or acetate packaging (just cut a wavy line across acetate or an alternative to give you a mask for the snowy hills)
Paper towels (so you can keep the paintbrush clean and take any excess color removed with the brush)

Share a card or other project you make using this tutorial with us on our Facebook page, tag us on Instagram (#spectrumnoir or #spectrumaqua) or on Twitter (@SpectrumNoir)! We’re also on Pinterest so tag us there as well for a chance to get re-pinned to our Colorist Creations board!

Sandie Gough lives in the UK with her husband and 8 children. She over 15 years craft experience, teaching, demoing, facilitating/designing art therapy sessions and you can find out more at http://fairytaledaydream.blogspot.co.uk/