Tip-to-Tip Marker Blend

A great feature with Spectrum Noir markers is the ability to blend colours together. The “Tip-to-Tip Marker Blend” technique is easy to learn and gives amazing results. With this method, you can easily colour a darker marker shade that will gradually fade into a lighter marker colour.

Before you start

Like any other colouring or blending technique, you will want to practice. This tutorial shows how to apply dark green marker to the tip of a light green marker, then colour with it. The end result is a beautiful green ombre effect.

Tip-to-Tip Blending is also a great way to colour small areas that regular blending techniques would be difficult to do. Try this technique using the fine bullet nib to colour with.

The Tip-to-Tip Technique

To begin, open the broad chisel nib end of your CG3 marker. Then, using the fine bullet nib end of the CG4 marker, touch it directly to the chisel nib of the CG3 marker as shown in picture.

Hold it there for about three seconds. As shown in the sample picture, the darker ink will begin to transfer on the nib of the lighter marker. The longer the marker tips are touching, the more ink that will transfer to the lighter marker.

You will be colouring on to the paper with the lighter coloured marker.

Before you start colouring, think about where you want the darkest colour. That is where you will begin colouring. The darker ink will transfer to the paper first, and then begin to fade to the lighter ink colour.

This spot was coloured by stroking the marker back and forth. Try colouring several “green ombre” patches, following the same process of adding dark marker colour to the light marker nib, and colouring back and forth.

Will it hurt my markers?

Tip-to-Tip blending does not ruin or cross-contaminate Spectrum Noir markers. Simply scribble onto some scratch paper until the darker colour comes completely off.

This can also be done anytime during the coloring process, if you applied to much dark. When you are finished colouring, always remember to clean the marker nib by scribbling onto scratch paper until it returns to the original ink colour.

Make a project

Now that you have some nice green ombre patches of colour, die-cut some shapes to use on a project.

When die cutting the four hearts, position the bottom tip of the heart in the darker green area.

Use the hearts to make a 4-leaf clover. Notice the nice fade from dark green in the centre to lighter green.

The little “pocket” was die cut from black cardstock and will be used as a pot. What a great way to stretch your supplies!

More ways to use this technique

Here’s another version that was made into a note card.  The blending possibilities with your Spectrum Noir markers are endless with the Tip-to-Tip Marker Blend technique. Try using the Blender marker for a fade from colour to white. Alternatively, try using markers from different colour families, such as red and yellow. Have fun!

Tutorial credit: Lori Barnett

Share your work with us on our Facebook page, Twitter, Instagram, or Pinterest (use our #spectrumnoir or #spectrumaqua tag) – we’d love to see what you’re colouring!

Supplies used to complete these projects:

  • Spectrum Noir Markers – CG3 and CG4
  • White Cardstock
  • Kraft Cardstock
  • Crafter’s Companion Little Angel Signature Collection by Sara Davies – My First Outfit Die Set
  • Crafter’s Companion Shimmering Cardstock – Black Pearl
  • Gemini Die cutting and Embossing Machine
  • Sequins and Rhinestone
  • Dimensional Foam Adhesive
  • Liquid Adhesive
  • Foam Blending Tool
  • Distress Ink – Gathered Twigs

Basic Pleats with Illustrator Markers

I just love the new Spectrum Noir Illustrator markers! This tutorial I will show you a simple technique for making pleats and shaded regions.

I will use two sets of three markers from the Vintage Blue and Brown Orange specter to color this image in a surprisingly interesting colour combination of orange and blue.

Gather your markers

This image has been coloured with:
Skin: Rose (FS1), Dusty Pink (FS2), Portrait Pink (FS3), Eggshell (FS8), Ivory (FS9), Pale Tan (TN1), Honeydew (TN2), Cream (FS6)
Hair: Green Grey 1 (GG1), Green Grey 2 (GG2), Green Grey 3 (GG3),Green Grey 5 (GG5), Honeydew (TN2)
Coat: Smoky Blue (VB1), Vintage Blue (VB2), True Blue (TB4), Ice Grey 2 (IG2);
Scarf: Vanilla (BO1), Mango (BO2), Green Grey 2 (GG2), Green Grey 3 (GG3), Green Grey 5 (GG5) Gold (GY3)
Fox: Dusty Pink (FS2), Eggshell (FS8), Ivory (FS9) Pale Tan (TN1), Honeydew (TN2), Green Grey 2 (GG2), Green Grey 3 (GG3), Green Grey 5 (GG5), Vanilla (BO1)

Create pleats on the Coat

If you are beginner it’s better to start with the widest portion of the image (here it is the coat). I usually go and cover it with the lightest shade – VB1.

It is just a basic coat so it doesn’t have to be perfect.

The next step is to mark the deepest/shadiest regions with the darkest shade – TB7.

Then I widen the shade with the middle color (VB2). The trick with this step is to blend in and out the three colours together.

And all that is left is to take the lightest shade and blend all together from outside to the inside of the pleat.

Colour the Scarf

The same four steps we can use for the scarf  with the lightest (BO1) – all over.

Marking the deepest regions with the darkest – BO3.

Blending them out with the middle shade – BO2.

And smoothing everything together with the first colour – BO1.

If you are not satisfied with the result yet you can repeat the final three steps over (and over) until you you like it or you can add some grays (here I used GG3 or GG5 on the scarf) to emphasize the shades.

Complete the image

Finish colouring as desired!

Share your work with us on our Facebook page, Twitter, Instagram, or Pinterest (use our #spectrumnoir or #spectrumaqua tag) – we’d love to see what you’re colouring!

Tutorial credit: Kalina Pavlova

Create an Outdoor Scene

This tutorial will share how I created this fun camping-themed outdoor scene. My husband and I enjoy camping and doing things with the kids outdoors, so I thought this was the perfect idea behind a sweet card to give him.

I started with a simple piece of the Ultra Smooth Premium White Cardstock cut to 4×5-1/4. I usually use this size for all of my card panels I create.

It’s a little smaller than the card size, which is 4-1/4×5-1/2 folded down. It leaves a nice thin border all around my main panel.

Create the Night Sky

I started off applying ink with a craft sponge in a swirling motion. This will create my night sky.

After I apply the lighter blue, I come in with a darker blue and craft sponge blending them together. I go back and forth using the lighter and darker blue to blend them until I achieve the color I like for my night sky.

It did dry a bit darker than what you’ll see above, which is exactly what I wanted. Keep in mind that I’m going to cover up the bottom portion so you won’t see the uneven color at the bottom.

Since this is a night sky, I applied some spray mist in white and flicked that on to my night background. I dotted on some larger “stars” with the end of the nozzle wand.

Open up the bottle and load the end of the nozzle wand with the paint. I tap on that to flick the dots on to the background. Let this dry completely before moving on.

Colour the Clouds

The next step is to stamp the clouds and the camper onto the Ultra Smooth Premium White Cardstock.

Tip: As you can see, I used a piece of scrap that I had in my stash. It helps to keep smaller scraps of the cardstock in your stash for small images like these.

After I stamped them, I used a glitter pen and lighter grey color from my Spectrum Noir Alcohol Markers to create the depth in the clouds.

Use Spectrum Noir Markers to Palette Blend

For the green on the camper overhang, I chose two different greens. The darker of the two is quite a bit darker, so this is where the palette blending method comes in handy.

  

Take your darker color and use the broad end to color a swatch onto an acrylic block.

What you’ll end up doing is taking your lighter color and picking up that darker color from your block and use that to blend together on your paper.

As you can see, the green isn’t as dark as it actually is if you were using the color straight from the marker.

I did this for the brown on the door and the aqua for the top of the camper.

It’s a great way to blend your colors!

I colored in the chevron pattern and the remainder of the little elements on my camper with the Spectrum Noir Alcohol Markers.

Next, I cut out the clouds and camper leaving a thin white border around each of them.

All the elements are complete, and I can start to assemble the card.

I freehand cut the green hill at the bottom of the card. I glued that down and will use the foam adhesive to adhere the clouds and camper the card. The sentiment was stamped off the side to allow placement for the camper. I laid it out before I stamped the sentiment to maker sure it was going to fit where I wanted it

And here is the finished card again:

Share your work with us on our Facebook page, Twitter, Instagram, or Pinterest (use our #spectrumnoir or #spectrumaqua tag) – we’d love to see what you’re coloring!

Supplies:

  • Ultra Smooth Premium White Cardstock
  • Spectrum Noir Alcohol Markers: GG1, CT2, GB5, DG2, DG3, IB1, FS5, CR1, BGR1, GR5, BT1, BT5
  • Memento Ink: Nautical Blue & Tuxedo Black
  • Versafine Ink: Onyx Black
  • Mister Huey’s Spray Mist
  • Distress Ink: Tumbled Glass
  • Sweet Stamp Shop, Campout Stamp Set

Floral Images Can Sparkle!

Add sparkle to your floral images with Spectrum Noir Sparkle pens. This tutorial will share how to design a fun and easy reverse “z fold” card to display your colouring. It will also create a card base showing embellishments in detail.

Watercolour the images similarly:

To begin with use two identically matched stamps to create a front and an inside image for your z fold card.

The stamps are different sizes to add detail and interest to the project. Apply your stamps to Rock-a-Block (or preferred) stamping mounts.

Then apply VersaMark clear ink to the stamps and print images onto watercolour card.  Sprinkle with Embossing Powder and set with a Heat Tool.

Creating shaped images:

In addition the images can be cut to the shape/size that you require, as can be seen.

Colouring the petals:

First add the Aquamarine marker to the bottom of the petals, this is the darker pigment. Then add the Moonstone over the Aquamarine before this dries.

This will blend the colours and create a colour gradient from dark to light. Apply the pigments straight from the pens to the stamped images.  Shake the pens well before use to disperse the pigment.

Colour the flower centres:

Next Harvest Moon pigment adds a deep orange glow to the base of the floral centers. Working toward the edge of the centers add the Moonlight marker to blend, shape and lighten.

Colour the leaves:

Finally a soft green tonal effect created for the leaves and stems. Blending the Peacock Blue and Soft Jade markers in like manner.

Completed coloured images:

The coloured stamps side by side so that matching colour palette displayed, as shown above.

Display your images:

As can be shown adding a sprinkle of sequins over your colouring increases the visual impact .   Mounting onto co-ordinating mats adds further sparkle and definition.

Create the z fold card base in detail:

Start with a piece of A4 card.  Score at 7.5cm and 15cm on the longer length.   Cut 3 pieces of matching designer papers 1 piece 14cm x 20cm and a further 2 pieces measuring 6.5cm x 20xm.  

Apply to designer papers to each white panel as shown in the picture.

Instantly adding depth to your card base:

Extra depth and definition can be added to your card base with the addition of another layer of  mats and mounts.

Cut 3 white mats measuring:  1 x 13cm x 18.5cm

2 x 6cm x 18.5cm

Cut 3 layers of designer paper:  1 x 12.5cm x 18cm

2 x 5.5cm x 18cm

As can be seen the addition of the mats and layers across the project lifts the card to another level.

Adding your reverse z fold detail across the bottom of the card:

Next cut a strip of A4 white card of a depth to fit the die cut of your choice and a strip of designer paper.  Here the white card is 5cm deep and the paper is 2cm deep. Fold the strip in the same manner as the card base scoring at 7.5cm and 15cm.  

Reversing the z fold strip, with the longer panel attached to the card front. Attach the smaller panels on the inside of the card.  

Additionally apply die-cut detail and designer paper to the card strip and add to the bottom of the card.

Decorate the finished project:

Finally apply the coloured panels to the card base.  

Further decorate with die cuts and detail including flowers or ribbon to create a uniquely individual creation!

In conclusion a closer view of the finished stamp, demonstrating sparkle detail. All in all a creation full of glimmer and shine!

Share your work with us on our Facebook page, Twitter, Instagram, or Pinterest (use our #spectrumnoir or #spectrumaqua tag) – we’d love to see what you’re colouring!

Tutorial credit: Laine Webb

Supplies:

Spectrum Noir Sparkle Markers:  Moonstone, Aquamarine, Moonlight, Harvest Moon, Peacock  Blue, Soft Jade.
Larger Stamp – Everlasting Love – Leonie Pujol
Smaller Everlasting Love stamp from free set including in Crafter’s Inspiration Magazine Issue 13
Crafter’s Companion Watercolour Card, Sheena Douglass Stamping Card, Coredinations Card
Sara Signature English Country Garden Designer Papers 12 x 12
Various Crafter’s Companion Cutting Dies
The Big Score Board
Ribbon, sequins and flowers are from personal stash

No-Blend Shading with Spectrum Noir Colorista Markers

Create gorgeous effects with shading

Are you looking for a quick and easy way to incorporate shading into your coloring? This tutorial will show you several ways to add shading without blending when coloring with your Spectrum Noir Colorista Markers.

For each step of the tutorial, the area in reference will be highlighted with a blue circle. The Colorista marker colors used for this tutorial are Leaf Green and Pear Green.

Learn the technique

Begin by coloring a base layer of Leaf Green. It’s perfectly fine if some areas end up a little darker than others, this will add some natural shading. Let this area dry for a few minutes.

Proceed to color alternating sections of the leaf with the same color, Leaf Green. This second layer will build upon the first layer and will become much darker. If you wish to, you can let this dry and and then color over these areas again to make them even darker.

For the next leaf, begin by coloring alternating sections with a base layer of Leaf Green.

Color in the remaining sections using Pear Green. This will give the illusion of shading while adding a pop of color at the same time.

The final shading method will again begin with coloring a base layer of Leaf Green.

Using Pear Green, color on top of the Leaf Green in each alternating section. This will create a deeper shade of green with a mixed hue of both colors. Have fun playing with different combinations of colors layered on top of each other to see what new shades you can create with your Spectrum Noir Colorista markers.

Share your work with us on our Facebook page, Twitter, Instagram, or Pinterest (use our #spectrumnoir or #spectrumaqua tag) – we’d love to see what you’re coloring!

Tutorial credit: Jodi Clark

Project Details:
Spectrum Noir Colorista Exquisite Florals Premium Marker Pad with colourable glitter
Colorista Markers
Leaves – Leaf Green, Pear Green
Flowers – Rose Red, Nectarine, Gold

Coloring Fair Skin Part Two

This is the second part of the coloring Fair Skin and Hair tutorial.

Part 1 of this tutorial can be found HERE.

Coloring Red Hair Tutorial

In coloring red hair we will be using Spectrum Noir Alcohol Markers TN7 TN6 and OR1.

Start by applying the darkest color, TN7 in the shadow areas of the hair.  Once all the shadows are drawn in, add a few small flicks of color further into the hair area.

The more of this color you add, the darker the final hair color will be. In order to get a lighter red I used very little of the TN7.

Next add in some of the TN6. Follow the same flicking motion as in the previous step, leaving spaces between the flicks for the next color.

Finish the hair with OR1. Use the same flicking motion as before, filling in the leftover white space. Also try to the keep some space between the “flicks” to allow the color variation to show.

After finishing with OR1,  go back with the Tn7 and darken up the shadow areas if needed.

Other Spectrum Noir Alcohol Markers used on this project:  FS9 FS4 FS2 TN1 CR2 TN2 GG2 GG1 BT5 BT4 BT2 GB9 GB7 GB4 DG2 CG1 LG2

 

Watercolored Three-Tier Gift Box

This watercolored gift box set uses just one Spectrum Aqua Marker. An easy to make project that is sure to impress!

How to watercolor the box lids

First, trim two sheets of 8 1/2” x 11” Spectrum Aqua Watercolour Cardstock as shown in picture.

Then apply anti-static powder to each panel, if desired. On the three lid panels, use VersaMark ink to stamp flowers. Heat emboss with white embossing powder. On the left-over scrap panels, stamp and heat emboss more flowers. These extra flowers will be used to embellish the boxes.

Next, to watercolor the box lids, color Kingfisher Aqua marker randomly around the flowers.

After that apply a wet watercolor brush to an uncolored area, and then work the brush into the ink color. The ink will begin to flow into the wet areas, and you can continue to brush the color around as desired. The goal is to create a watercolor background around all the flowers.

How to watercolor the flowers

First, color the flower centers, and then blend out with watercolor brush.

Next color the flower embellishments with the Kingfisher Aqua marker in the areas you want darkest.

Then apply a wet watercolor brush to uncolored area, working the brush up to the ink. The ink will flow into the wet area and create beautiful watercolor flower petals.

Finally, set aside the panels to completely dry. Once dry, trim out all the flowers from the scrap panels and add a pearl to the centers. These will be used to decorate the boxes.

How to make the lids using The Ultimate Crafter’s Companion and The Boxer Board.

First place the lid panel onto The Boxer Board with one edge butted up against the “Box Lid” sidebar. Score at the 1″ line. Repeat this on all edges of all three panels.

Next cut a small v-shaped notch in each of the corners, where the scored lines intersect. The first cut should be along one of the scored lined, and the diagonal line should be cut from the excess corner piece. Fold and crease along each of the scored lines and adhere the corner tabs to form the lids.

How to make the box bottoms using The Ultimate Crafter’s Companion and The Boxer Board.

Start by creating the bottoms using three panels of white cardstock (measurements below). This time butt them up against the “Box Bottom” sidebar to score the lines. Cut corner notches, crease, and adhere the same way as the box lids.

Box bottom cutting and scoring measurements:

  • Large box bottom – 11 1/2” x 11 1/2” panel, score at 2 1/2” Box Bottom score line.
  • Medium box bottom – 9 1/2” x9 1/2” panel, score at 2 1/2” Box Bottom score line.
  • Small box bottom – 7 1/2” X 7 1/2” panel, score at 2 1/4” Box Bottom score line. (Note: The side tabs may need trimmed off a bit on this box bottom before adhering.)

 

Finally, assemble the boxes by stacking on top of each other, adhering together if desired.

Tie ribbon around the stack and embellish with cut out flowers.

 

Tutorial Credit: Lori Barnett

Supplies used for this project:

  • Spectrum Aqua Watercolour Cardstock
  • Spectrum Aqua Marker – Kingfisher
  • Crafter’s Companion Sheena Douglass Groovin’ 60’s Collection – Bloomin’ Sixties EZMount Rubber Stamps
  • The Ultimate Crafter’s Companion and The Boxer Score Board
  • Watercolor Brush
  • Anti-Static Pouch
  • VersaMark Ink Pad
  • White Embossing Powder
  • Heat Embossing Gun
  • 12” x 12” White Cardstock
  • White Pearl Stickers
  • White Ribbon
  • Dimensional Foam Adhesive
  • Adhesive

Masking with Stencils and Aqua Markers

stencil 1

Combine Spectrum Noir Aqua watercolor markers and a stencil to create the perfect custom background! Learn how in the steps below.

Color the bird image

Before creating the background, create the focal point image.  Stamp a bird on watercolour paper using black dye in.

Cover with clear embossing powder and activate with a heat gun. This will protect the ink from bleeding with water is added.

Color the image using Spectrum Aquas. Scribble Yellow on an Acrylic block, then use the Crystal Clear Spectrum Noir Sparkle Pen to blend.

Treat the Sparkle Pen as a waterbrush or a paintbrush would be treated.  This is the blending tool.

Start with a light base of yellow on the body of the image.  Then, start adding in additional colors.

Pick up the colors with the tip of the Sparkle Pen.

Blend in Orange, Marigold, Meadow and Sunflower to create depth.

Use Orange and Marigold to add color to the beak.

Create the stencil background

Trim a piece of watercolour cardstock to 4 x 5.25 inches. Place a stencil over it and secure it down with removable tape or adhesive.

This is imperative so the stencil does not move.

Add masking fluid.

Masking fluid comes in pen form or in a bottle (it can be applied with a brush).

Another option would be to add watermark ink over the stencil and then clear emboss it with powder.

However, the end will result be different; the areas that are void of color will be shiny instead of dull.

Once the entire area is filled in, remove the stencil.

Using the same technique as before (acrylic block as a palette), add color.

This time, use a waterbrush instead of a Sparkle Pen.

Use Purple, Yellow and Aquamarine.  Allow the background to fully dry.

Use a rubber adhesive remover or your finger to rub away the masking fluid.

Dip the waterbrush into some Aquamarine and flick it onto the background. This adds more interest.

Finish the card

Stamp a sentiment in black ink at the top of the panel.  Note: if clear embossing powder was used instead of making fluid, this step should be done before the stencil is laid down. The embossed areas will repel ink.

To finish off the card, trim out the bird (or die cut if matching die is accessible) and adhere to panel using foam squares.

Create a card base out of black cardstock (4.25 x 11, scored at 5.5 inches).

Assemble card and add sequins to upper right corner.

This is a simple and fast way to create a custom background with that stunning watercolored look! Share your work with us on our Facebook page, Twitter, Instagram, or Pinterest (use our #spectrumnoir or #spectrumaqua tag) – we’d love to see what you’re coloring!

Tutorial credit: Chrissie Tobas

Project Details

Spectrum Aqua Markers
Primary: Aquamarine, Yellow, Orange, And Purple; Floral: Meadow, Sunflower, and Marigold
Crafter’s Companion Watercolour Cardstock
Spectrum Noir Sparkle Pen
Clear Overlay: Crystal Clear
White Sequins
Acrylic Block
Hero Arts Black Ink
Ranger Clear Embossing Powder
Heat Gun
Stampers Anonymous Bird Crazy Stamp Set and Coordinating Die
My Favorite Things Concentric Circle Stencil
Avery Elle Oh Happy Day Stamp Set
Waterbrush
Rubber Square
Molotow Masking Pen

Custom Made Gift Box

Finished Gift Box

Want to create a quick & easy-to-make thank you gift box? Use Spectrum Noir Illustrator markers to make a stunning topper for a gift box perfect for not only a thank you gift, but to use throughout the year.

To color the image:

Gift Box step 1

Coloring the petals:

First, stamp or print the image of your choice onto alcohol marker coloring paper.

Then starting with the lightest Spectrum Noir Illustrator shade Daffodil color the petals.

Second, use the blender pen to fade out the Daffodil creating a smooth blend.  If pigment bleeds remove with the blender pen.

Gift Box Step 2

Third, add further color detail to your petals.

Color one flower on the outside of the petal with Flame Red. Blend in the lighter shades Vintage Pink and Pink Lace. The fine nibs create small strokes of color build up.

Extra definition is  given with small dots of True Black where areas of deep shade would exist.

Gift Box Step 3

Fourth, tone and depth detail has been created on the petals with Mango.

Start from the central stem section of each petal and blend with Sunshine.

Gift Box Step 4

Finally, color all the flower petals in the same manner.

Use the markers to create dramatic petal detail.

Color the center of the flower shown with the True Black marker.  Add small highlight details with white gel pen or leave the areas uncolored.

Gift Box Step 5

Coloring the leaves & stem:

The leaves and stem of the tulips are next.  Here the light is coming from the right of the image and the marker color gradient reflects this.

First, start with the darkest marker shade Green Gray.  Lighten the color gradient using Pear Green, Pale Citrus, Moss Green, Olive Green, Khaki.

The lightest shade used is Chartreuse.  Apply using the palette blending method or the Blender pen.

Gift Box Step 6

Second, the rest of the tulip leaves and stems are colored with the same markers.  Add extra color detail with a light flick of Sand to the edges of the Chartreuse and blend.

Third, small strokes of white gel pen added create areas of light and detail.

Gift Box Step 7

Finally, to make the image pop add an outline coat of Gray Green.  Blend to create a light shadow with the Blender Pen.

Gift Box Step 8

Mount the image on gold mirror card.

Gift Box Step 9

To make the gift box:

First, cut a piece of card to form the cover of your box.  Card measures 6.5” wide and 12” long and is double sided Centura Pearl.

Score card at 5.5” and 6.5”.

Gift Box Step 10

Second, make the inside of your box by cutting a piece of card measuring 8” x 7”.   Score round all 4 edges at 1” and create 4 tabs cut on the diagonal.

Gift Box Step 11

Third, apply Collall Tacky Glue to each of the 4 tabs and attach each tab to a scored box side.

Gift Box Step 12

Fourth, attach a strip of double sided tape across the middle of the inside of your box cover and add a length of ribbon.

Leave enough ribbon to tie a large bow at the side of your box construction.

Finish by adding the colored topper to the gift box cover.

Insert the box base into the box cover and glue to secure.  Tie a bow on the side of your box construction and your project is complete.

Share your work with us on our Facebook page, Twitter, Instagram, or Pinterest (use our #spectrumnoir or #spectrumaqua tag) – we’d love to see what you’re coloring!

Tutorial credit: Laine Webb

Supplies:

Image – Power Poppy
Spectrum Noir Illustrator markers: Daffodil, Blender Pen, Flame Red, Vintage Pink, Pink Lace, True Black, Mango, Sunshine, Grey Green, Pear Green, Pale Citrus, Moss Green, Olive Green, Khaki, Chartreuse, Sand.

Coloring Fair Skin

14882122_10210679140596009_7875109915573401514_o

This tutorial will share how to color fair skin with Spectrum Noir alcohol markers.

For this example the following markers are: FS9, FS4, FS2, TN1, CR2, and TN2.

1

The first step is to add in the shadow details with the darkest marker in the blend, FS9. The shadows will be around the sides of the face, under the hair, under the chin, on the outer edges of the neck and around her necklace.

At this point you can also draw in a nose if you’d like.

I’m coloring this as if the light source was to the right so the shadows will extend further on her left side since it farther away from the light source.

2

Next take the FS4 and slightly overlap the previous color to get a smooth blend.

Extend the FS2 a little further out from the shadow areas but be sure to leave some white space for the lighter colors.

4

Now add the FS2 just slightly overlapping where the FS4 ended and blending even further out from the shadows.

Repeat the step above with TN1, but this time extend the color over the rest of the face.

5

Add some blush to the cheeks with CR2.

Start at the outer edge of the face and lightly extend it over the cheek area.

6

Lightly blend the CR2 out with the TN1 until you are happy with the amount of blush on her cheeks.

9

Repeat the FS9, FS4, FS2, TN1 blend on the rest of the skin areas. You can go back in and deepen any shadow areas that have blended out too much during the first coloring.

To add the freckles I just made tiny dots on the cheeks and around the necklace with TN2.

Stay tuned for part two of this tutorial, all about coloring red hair!

Share your work with us on our Facebook page, Twitter, Instagram, or Pinterest (use our #spectrumnoir or #spectrumaqua tag) – we’d love to see what you’re coloring!

Tutorial credit: Mari Kocjancic

Skin: FS9, FS4, FS2, TN1, CR2, TN2
Hair: TN7, TN6, OR1
Jewelry: GB9, GB7, GB4, Clear Sparkle Pen
Shirt: BT5, BT4, BT2
Eyes: DG2, CG1, LG2
Background: GG2, GG1, Blender Pen